Design & Technology - Year 10

Last half term, we asked you to complete a project in a similar way to the method you will use to approach your coursework in Year 11 (worth 50% of your grade).  This half term, we would like you to concentrate on exam content (worth 50% of your final grade)

Week Beginning - 22nd June

What I will be learning about - 

Textiles and manufactured boards

Electronic systems

Developments in new materials

What I will need to know or be able to do by the end of the week

Read the revision booklet

Complete sections of the question booklet.  You can print the booklet or by make notes on paper.

Please photograph your work and email it to your teacher when complete.

This is good revision material, please organise and keep your notes.

Resources I will need to use

Revision booklet 2

https://eggbuckland.sharepoint.com/:b:/g/Technology/EcPg3nsOGRVMvFOmfAzHQPYBMKRHKZ0RiOW1w4UhhhzETA?e=hJfnhS

 

Question booklet 2

https://eggbuckland.sharepoint.com/:b:/g/Technology/EaVReLiXckFGthPoXDnJgyoBrG7-jzDFl8NJPpq9eDsvjA?e=hleEMx

Week Beginning - 15th June

What I will be learning about - 

Properties of materials

Paper, board and timber

Metals, alloys and polymers

Textiles

What I will need to know or be able to do by the end of the week

Read the revision booklet

Complete sections of the question booklet.  You can print the booklet or by make notes on paper.

Please photograph your work and email it to your teacher when complete.

This is good revision material, please organise and keep your notes.

Resources I will need to use

Revision booklet 2

https://eggbuckland.sharepoint.com/:b:/g/Technology/EcPg3nsOGRVMvFOmfAzHQPYBMKRHKZ0RiOW1w4UhhhzETA?e=hJfnhS

 

Question booklet 2 https://eggbuckland.sharepoint.com/:b:/g/Technology/EaVReLiXckFGthPoXDnJgyoBrG7-jzDFl8NJPpq9eDsvjA?e=hleEMx

Week Beginning - 8th June

What I will be learning about - 

Product stainability and social issues

Products in society

Powering systems

What I will need to know or be able to do by the end of the week

Read the revision booklet

Complete sections of the question booklet.  You can print the booklet or by make notes on paper.

Please photograph your work and email it to your teacher when complete.

This is good revision material, please organise and keep your notes.

Resources I will need to use

Revision booklet 1

https://eggbuckland.sharepoint.com/:b:/g/Technology/EXvq0CicRDtGnGjxLJ0QpAUBFpVeTK30IiWIxwvhXyDfMA?e=BQaJZe

Question booklet 1

https://eggbuckland.sharepoint.com/:b:/g/Technology/EYeRbRUoSplOh7P4FTteLHIBUNT1NU4luy8ITgdzMwLGHg?e=pXuZqK

Week Beginning - 1st June

What I will be learning about - 

Technology in manufacturing

Production systems

What I will need to know or be able to do by the end of the week

Read the revision booklet

Complete sections of the question booklet.  You can print the booklet or by make notes on paper.

Please photograph your work and email it to your teacher when complete.

This is good revision material, please organise and keep your notes.

Resources I will need to use

Revision booklet 1

https://eggbuckland.sharepoint.com/:b:/g/Technology/EXvq0CicRDtGnGjxLJ0QpAUBFpVeTK30IiWIxwvhXyDfMA?e=BQaJZe

 

Question booklet 1

https://eggbuckland.sharepoint.com/:b:/g/Technology/EYeRbRUoSplOh7P4FTteLHIBUNT1NU4luy8ITgdzMwLGHg?e=pXuZqK

Design Technology Year 10 Learning Tasks for Year Pinball Machine Summer Term 2020

 

To complete this task you will need to download the supporting file.  This is supplied as either an editable powerpoint or readable PDF file.

 

PDF

https://eggbuckland.sharepoint.com/:b:/g/Technology/ERTYbBntkWJNl9JRJ9blYzYBcsUra48TSlZQSIPqG6_f7w?e=KItIFQ

 

Powerpoint

https://eggbuckland.sharepoint.com/:p:/g/Technology/EXfp6KZpuVVEgAeg9PZMaWoBTaFin_DLgUVNKJWCYixj9w?e=NU7T6L

 

Work can be completed entirely on paper or electronically.

 

Please note: The “making” part of your course only makes up about 20% of the grade.  The rest comes from the Design folder and the exam.  Please give this design work the effort it deserves!

 

As part of the project, you will be encouraged, if possible, to download and install either Fusion 360 or 2D Design Student

Fusion can be downloaded from here: https://www.autodesk.com/products/fusion-360/students-teachers-educators

2D Design can be downloaded from here: https://eggbuckland.sharepoint.com/:u:/g/Technology/EfqYOlKo9a5Ar_PdpLhGSMoB40AGdQ63Fn9t6aLtuLjJ4Q?e=IqK554

This version of 2D Design requires a licence file to save work.  Instructions will be available on the College website.  The student version does not allow you to print, however you can screen print

 

If you are unable to download fusion or 2D Design, you can work on paper.  Links have been added for isometric and grid paper.

Week Beginning - 25th May

What I will be learning about - 

Evaluate against Specification

Redesign as Needed

What I will need to know or be able to do by the end of the week

Evaluate against Specification

Look back at your specification.  For each point, comment about how effective you think your solution is.

Evaluate against your working drawing.  Is the product the same as you intended to make?  If not why?

Redesign as Needed

Discuss with your family how you could improve your solution. Make revisions. Draw new designs. Iterate your design to make your product the best it can be.

Resources I will need to use

Pinball Machine Booklet  Page 17

Pinball Machine Booklet  Page 18

Week Beginning - 18rd May

What I will be learning about - Photo log

What I will need to know or be able to do by the end of the week

  1. Put your pictures together.  Explain how your project was made.  Show pictures of the completed machine

Resources I will need to use

Pinball Machine Booklet  Page 16

Week Beginning - 11rd May

What I will be learning about - 

Build a Prototype

What I will need to know or be able to do by the end of the week

  1. Building a prototype makes your ideas real! These early versions of the design solution help your team verify whether the design meets the original challenge objectives. Push yourself for creativity, imagination and excellence in design. Take photos as you are going along

Resources I will need to use

Pinball Machine Booklet  Page 15

Week Beginning - 4rd May

What I will be learning about - 

Working/ Orthographic or CAD Drawing

What I will need to know or be able to do by the end of the week

  1. 3 Orthographic views of your project – Front, side and plan.  Preferably drawn full size or to scale 1:2.  Drawings should have the dimensions on them which you intend to use to make the prototype

Resources I will need to use

Pinball Machine Booklet  Page 14

 

Either:  Computer + 2D Design (Downloaded from College Sharepoint) https://eggbuckland.sharepoint.com/:u:/g/Technology/EfqYOlKo9a5Ar_PdpLhGSMoB40AGdQ63Fn9t6aLtuLjJ4Q?e=IqK554

 

or

Fusion 360 Download and log in with your existing account

https://www.autodesk.com/products/fusion-360/students-teachers-educators

 

or

Paper – ideally A3 (could be 2 pieces of A4 taped together), pencil and ruler

A4 grid paper for working by hand

https://eggbuckland.sharepoint.com/:b:/g/Technology/EV5rZxLG1x5CpOCKrgpo4tIBhQ4j47heAWjEUCg2xE3t0A?e=djxBkZ

Week Beginning - 27th April

What I will be learning about - 

1. Initial Designs

2. Develop Designs

What I will need to know or be able to do by the end of the week

  1. You need to produce a range of initial designs.  They do not have to be completely different and can be variations on a theme.  They should be annotated identifying key materials, how it works, how it would be made etc.  Ideally they will be in colour

  2. Sketch your chosen idea out in detail.  Think about what material you have / can get at home.  Identify possible methods of construction

Resources I will need to use

1. Pinball Machine Booklet  Page 12

 

Isometric paper

https://eggbuckland.sharepoint.com/:b:/g/Technology/EfUVV0AP1ghBir6q2lnoTH0BKcISFWUfW9PbktPIgpocxg?e=sXzEtI

2. Pinball Machine Booklet  Page 13

 

Isometric paper

https://eggbuckland.sharepoint.com/:b:/g/Technology/EfUVV0AP1ghBir6q2lnoTH0BKcISFWUfW9PbktPIgpocxg?e=sXzEtI

Week Beginning - 20th April

What I will be learning about - Identify the Need & Constraints

What I will need to know or be able to do by the end of the week

  1. Answer questions on These What is the problem to solve? What do we want to design? Who is it for? What do we want to accomplish? What are the project requirements? What are the limitations? What is our goal?

Resources I will need to use

Pinball Machine Booklet Page 4

https://eggbuckland.sharepoint.com/:p:/g/Technology/EXfp6KZpuVVEgAeg9PZMaWoBTaFin_DLgUVNKJWCYixj9w?e=6t1KU1

Week Beginning - 14th April

What I will be learning about - Problem outline and Design Brief

What I will need to know or be able to do by the end of the week

  1. Understand the concept of a problem outline and design brief.  Understand where one is used.  Next year, you will need to write your own

Resources I will need to use

Pinball machine Booklet Page 3

https://eggbuckland.sharepoint.com/:p:/g/Technology/EXfp6KZpuVVEgAeg9PZMaWoBTaFin_DLgUVNKJWCYixj9w?e=6t1KU1

Other useful learning resources

Click the link below to download your Knowledge Organiser. 

Designated Safeguarding Lead Officer Mrs E Smith - Assistant Principal 

Deputy Designated Safeguarding Lead  Mrs K Gibson

Mr A Calderwood

Safeguarding trained and SENDCo 

Mr I Lowcock

Eggbuckland Community College 

Westcott Close, Eggbuckland, 

Plymouth, PL6 5YB

Phone: 01752 779061

email:

mailbox@eggbuckland.com

If you have any queries please contact the School Administrators

Mrs A Pillage

Miss J Rogers

Mrs S Pain

Request for paper copies of the information on this website
can be made by contacting us.
Website Designed by Eggbuckland Design & Media
© Eggbuckland Community College Multi Academy Trust 2020
whisper.png
Logos 2015 - maroon - solid background.j
AFA ECC Logo.jpg